| Author |
 Topic  |
|
|
lincoln
49 Posts |
 Posted - 10/08/2009 : 2:35:45 PM
|
Anyone know what kind of epoxy Terry used for the pretty Mantis fuse? How about how to tell if my Aegea's wing was made by Phil and what type of epoxy was used there?
Also, has anyone got a good solution for when the wing skin separates a bit from the core right next to the hinge? I can glue it back down, I suppose, but what about prevention? At the rudder, I just sewed the sides together, but that's ugly.
How about when the hinge wears out? Book tape?
Now that I've been flying it a bit, I like the way the Aegea handles. But I'm sure it will fly better as I tune it up more.
Thanks |
Lincoln Ross |
|
|
Duane
24 Posts |
Posted - 02/18/2010 : 2:57:31 PM
|
quote:
Originally posted by lincoln
Also, has anyone got a good solution for when the wing skin separates a bit from the core right next to the hinge? I can glue it back down, I suppose, but what about prevention? At the rudder, I just sewed the sides together, but that's ugly.
I tried someone's suggestion to poke a lot of tiny holes through the skin with a needle and put drops of foam-safe thin CA on the holes to rebond the skin. It worked ok but left the finish a bit ugly after using a piece of waxed paper to press the skin down. Another skin delam repair resulted in the hinge tearing soon after, probably because I got too much CA in the hinge, making the fibers brittle.
http://www.rcgroups.com/forums/showthread.php?t=864003
quote:
How about when the hinge wears out? Book tape?
Yes, or 3M Blenderm or Don Richmond's hinge tape.
http://www.hilaunch.com/Wing_tape.htm |
Duane
CASA, FARM, LSF III #7971 |
 |
|
| |
Topic |
|
|
|
Aegea epoxy types, separation of skins at hinge
Forum Locked
